434 mhz saw filter 7 mhz bandwidth part number: SF0434BA02617S spectrum microwave, inc. 400 nickerson road, marlborough, ma 01752, usa phone 508-251-6400 fax 508-251-6401 www.spectrummicrowave.com dssf0434ba02517s rev x2 4feb11 page 1 of 3 description 433.92 mhz saw filter with nominal 7 mhz bandwidth. 3 x 3 mm lcc package, 6 pads. rohs compliant. typical performance
434 mhz saw filter 7 mhz bandwidth part number: SF0434BA02617S spectrum microwave, inc. 400 nickerson road, marlborough, ma 01752, usa phone 508-251-6400 fax 508-251-6401 www.spectrummicrowave.com dssf0434ba02517s rev x2 4feb11 page 2 of 3 specification parameter min typ max units center frequency (fc) 433.92 mhz nominal bandwidth (1 db) 7 mhz insertion loss (433.00 C 434.71 mhz) 2.0 2.7 db amplitude ripple (433.00 C 434.71 mhz) 0.3 1.3 d b pp attenuation (reference level from 0 db) (389.0 to 392.0 mhz) (411.0 to 414.0 mhz) (454.0 to 457.0 mhz) (475.5 to 478.5 mhz) 42.0 40 .0 40.0 42.0 54.0 50.0 51.0 52.0 db db db db ambient temperature 25 ?c system source and load impedance 50 ohm maximum ratings parameter min max units operating temperature range 10 60 ?c storage temperature range 40 85 ?c input power level +10 dbm dc voltage 3 v matching circuit notes: external matching components are not required. device is intended to operate in a 50 single ended system. input 50 w single ended output 50 w single ended 2 5 all other pads gnd gnd
434 mhz saw filter 7 mhz bandwidth part number: SF0434BA02617S spectrum microwave, inc. 400 nickerson road, marlborough, ma 01752, usa phone 508-251-6400 fax 508-251-6401 www.spectrummicrowave.com dssf0434ba02517s rev x2 4feb11 page 3 of 3 package outline footprint marking pad configuration: 2 input 5 output 1,3,4,6 ground note: dimensions shown are all in mm . iso 9001 registered all specifications are believed to be accurate and reliable. however, spectrum microwave reserves the right to make changes without notice. ? 2011 all rights reserved. smi smi smi smi
|
